Chauvet Obey 40
Step Schedule

obey 10
EVENT   Start Date   End Date  

Chase (1-6)   Step (1-999)  
Fixture Page A Page B
CH 1 CH 2 CH 3 CH 4 CH 5 CH 6 CH 7 CH 8 CH 9 CH 10 CH 11 CH 12 CH 13 CH 14 CH 15 CH 16
1                                
2                                
3                                
4                                
5                                
6                                
7                                
8                                

Chase (1-6)   Step (1-999)  
Fixture Page A Page B
CH 1 CH 2 CH 3 CH 4 CH 5 CH 6 CH 7 CH 8 CH 9 CH 10 CH 11 CH 12 CH 13 CH 14 CH 15 CH 16
1                                
2                                
3                                
4                                
5                                
6                                
7                                
8                                

logo  Stagecraft Production Service, 41 West Sixth Street, Franklin, Ohio 45005




INSTRUCTIONS
Purpose This worksheet documents the settings for each step of a chase.
Architecture Each Chauvet Obey 40 chase consists of up to 999 steps. Chases can be cascaded during operation i.e. you can program a forward chase on 1, a reverse chase on 2, then execute an alternating chase by selecting 1 and 2 together. Chase speed and fade time are interactive and controlled during execution, thus, simply changing those settings can dramatically change the look. Most chase patterns are fairly simple, however, using incremental changes can make more complex looks especially when the chase is controlling fixture movement.
Printing For best results, set printer to only print page one unless you need copies of these instructions.
Event This block can be used to describe the event.
Start Date This block can be used to indicate date when fixtures need to be ready.
End Date This block can be used to indicate date when fixtures will be available for the next event.
Chase Specify the chase being documented.
Step Specify the step number being documented.
Cell Specify the value for each channel of each fixture active in this step.